在镇江地区从事铝艺大门、安全防护栏研发、设计、生产、安装一条龙服务

红树林彩票

网站首页 > 红树林彩票注册 > 铝艺大门

红树林彩票官网

2018-05-20 17:32:59 红树林彩票 阅读

镇江铝艺大门的喷漆方式要根据要根据镇江铝艺大门的特点,采用自动喷枪另加手工喷枪补喷相结合的形式,目的是实时监控喷塑质量,保证产品质量稳定。

一般纯聚酚粉术涂料的固化是通过调整加热炉的温度和链速来保证固化温度和时间。采用冷风吹干,在吹干的过程中,对工件进行检查,对于允许缺陷,如流挂、起泡、露底、缔孔等可用丙酮等稀释粉末涂料,趁工件未晾时涂程或喷覆于缺陷表面,用余热固化对于重大缺陷需要进行返修处理,根据涂膜厚度选取不同的处理方法,一般有直接上件重新喷粉、机械打磨、用脱膜剂处理三种方法。

以上就是镇江铝艺大门的喷漆方法,希望能对您有所帮助。

The spray painting mode of the Zhenjiang aluminum gate should be based on the features of the Zhenjiang aluminum gate and the combination of automatic spray gun and manual spray gun. The aim is to monitor the quality of the spray in real time and ensure the stable quality of the product.

The curing of general polyphenols powder coating is to ensure the curing temperature and time by adjusting the temperature and chain speed of the reheating furnace. In the process of blowing dry, it is used to check the workpiece during the drying process. For the allowable defects, such as the use of acetone, such as hanging, blistering, bottom, hole, and so on, it can be dilute powder paint such as acetone. For different treatment methods, there are generally three methods: direct powder injection, mechanical grinding and membrane removal.

The above is the painting method of Zhenjiang aluminum art gate, hoping to help you.


标签:   镇江铝艺大门 铝艺大门